top of page

Specialised Packing

  Why control leak?  

 In thermic fluid system

  • Leak is hazardous - it is safety hazard.

  • Hot leaked oil in contact with air oxidizes. It forms sludge, carbon.

  • Collecting leaked oil and using it for topping increases degradation of thermic fluid.

  • Leaked oil used for top up, spoils good oil in the system. 

 

Stop the leak!! It is easy 

 “Use Macstar” non-asbestos gland packing. 

Macstar  

  • “Macstar” non-asbestos, semi-compression gland packings solve the problems of leakage from valve, pump, reactors, vacuum pumps glands etc.

  • Product range from - 240°C to + 280°C, from vacuum to 70 bar and for pH 0 to 14 for any RPM and any size.

  • Macstar gland packings solve the problems of leakages for aggressive chemicals, such as hydrofluoric acid (HF), sulfuric acid (H2SO4), caustic (NaOH/KOH), thermic fluid, steam etc.

  • With Macstar, we introduced a concept of free sized packings; which reduce the leakages and lowers the inventory.

In thermic fluid system -

Use Macstar packings :

  • To control the leakages,

  • To reduce the chances of accidents

  • To reduce labour cost.

  • To avoid repetitive work

  • To reduce inventories

Doc_05_edited.png

How to control Pump leak by using "Macstar Hotpack"

“Install Pump properly;

Stop leakages instead of using hot leaked oil for top up.”

downarrow.gif

How to control Valve leak by using

“Macstar Valvepack"

"Prevent Valve Leakage, make it virtually leak-free, Reduce top-up & save oil"

 

downarrow.gif

How to control Flange leak by using

“Macstar Macgraph"

"Prevent Flange Leakage, make it virtually leak-free, Reduce top-up & save oil"

downarrow.gif
bottom of page